Planters & Co: Pokemon – Petilil
₹1,200.00
Adorable Petilil Planter (Diameter of hole; 20 mm)
Related products
-
Add to cart
A stackable magnetic support collar for small seedlings in the AeroGarden. (I just wanted a magnetic version) The collar comes apart in halves and is easy to install and remove. It also has side vents for airflow and to put stems through if needed. The model has several small pockets that can accommodate 4x2mm (4mm …
-
Add to cart
Adorable Sunkern Planter (Diameter of hole; 40 mm) Remix of model by @http://Makersmart.in If you want to see more of my work, please check out my Patreon, where you can browse even more models and exclusive content. Thank you*
-
Stone Wall Planter Round
₹0.00Add to cartCapture the spirit of ancient architecture with our Stone Wall Planter, blending history with modern functionality. Could your decor use a timeless touch? 🧱 Featuring a stone wall texture, this planter brings a rustic style to your decor. Print with a layer height of 0.16mm or 0.20mm, and 15% infill.
-
The Daso Planter Pot
₹1,500.00Add to cartInterested in selling physical prints of this design? Terra de Verdant offers access to over 300 high-quality STL designs just like this one. You can download all our designs and gain legal right to sell the physical prints by joining our membership. Find out more in the link below.
-
Cute cat planter
₹800.00Add to cartThis model is for personal use,
V2
-Changed the position of the brown spots for better printing
-Added quick connector for easier assembly of the spots
-Bigger parts for the face for better printing and easier assembly
Ok the last planter was pretty popular so here is a third one, sorry but I had to do a cat.
It should be quite easy to print and is available in two version, an assembled one (if you don’t really care about waste) and a version to assemble yourself.
It should fit most 5cm pots but I’ve added one that you can 3D print if necessary.
Most part should assemble without glue, but for the one that need some I would advise on using CA glue (or 3D gloop if you have access to it).
You don’t need any supports for this print, I’d advise on using adaptative layers Also scaling it up will work.
The example model was printed on an X1, with a 0.4 nozzle and with a no name wood PLA, overture Black, and overture white.
Let me know if you encounter any issue in you prints so I can help you fix it.3D printing
Reviews
There are no reviews yet.